4-way Zigbee relay for switches, remote control, AC85V-250V/USB5V, up to 2200W/10A

Introducing the Tuya Smart 4-Way Zigbee Relay, equipped with remote control and RF433MHz technology. This relay is compatible with AC85V-250V/USB5V power sources and supports a maximum load of 2200W/10A.

Zigbee Three Mode switch Model:ZG-005 Model:ZG-005-RF Parameters: Input voltage: Ac 85V~250V 50/60HZ Max.Current:2200w/10A/gang Wireless Standard:Zigbee Working temperature:-20°C~70°C Size:69*41*20mm Checklist before using the device You need to have a Zigbee gateway. Try to be close to the Zigbee gateway when pairingAdd device flow to mobile APP Here is an example of adding a device to tuya Zigbee gateway 1.After installation, power on the device and confirm that the device's network indicator is flashing Status, click the Zigbee gateway card. (lf the device network indicator is not flashing, you can press and hold any manual Switch for 8 seconds to reset the device) 2.Click “Add subdevice"3. Wait for about 1 minute until the device is found, then click "Done" 4. Add successfully, return to the main interface of tuya, you can see the newly added device. 5. When the device's network indicator light is on, remote control can be performedRemote control matches the code Matching: ① hold the manual For Switch for 3 seconds until the RF pairing indicator (blue light) is on ② then long press the remote control buttons ③ Loosen the remote control buttons, matching success Clear code: Long press the manual For Switch for 15 seconds (RF pairing indicator is always on), loosen the manual For Switch until the RF pairing indicator is off*note: the matching/clear code method is only available with RF function switch/module reference. TROUBLESHOOTING Solutions for the failure of product matching and offine: Enter the homepage of App, click the icon in the lower right corner of the interface to enter