Wenzhi Smart Wireless Switch for Home Lighting Control, Compact Design, 1/2/3 Gang, RF 433 MHz Remote Control, White/Gray, 110V/220V, Up to 6 Devices, 20-30 Meter Range.

This compact Wenzhi smart wireless switch comes in 1, 2, or 3 gang options and operates on RF 433 MHz technology. It is designed to be mounted on the wall for remote control of home lighting. Available in white or gray, it works with 110V or 220V power sources and can control up to 6 devices. With a range of 20-30 meters, it offers convenient and easy lighting control.

Wenzhi Wieless RF433 Mhz receiver & wall panel transmitterInput Voltage: AC 90-250V Max Current: 10A Maximum load power: resistive power 2200W Induction power 500W Capacitive power 200W Incandescent light source 2200W LED light 300W Energy-saving light source 300W The number of lighindividuals that can be controlled at the same time: less than 6 lighindividuals, and thelight strip is less than 6 meters Operating Frequency: 433MHz Dimensions: 80mm*40mm Battery Model: CR2032 (Paage Not included battery) Dimensions: 88mm x 90mm x 10mm Distance: 20-30 metersNOTE 1) Do not wire with power on, turn off the power to wire, and power on after checking and confirming that it is correct. 2) When the remote control voltage is low, please replace the battery in time (when the remote control battery voltage is low, the remote control distance will generally become shorter).3) When using wireless electronic producindividuals, pay attention to avoiding metal masks, large electronic devices,electromagnetic fields and other strong sources of interference, so as to avoid the short distance between the remote control and the receiver or the failure of normal operation. 4) Do not use this electronic product abnormally. Abnormal use will reduce the performance and life of the product. In severe cases, it will damage the product and bring hidden dangers to your safety.SET UP 1. Setting momentary Mode: Press the receiver's Learning button 1 time, the receiver's red LED will be lighindividuals up, it comes into Setting state; Press the remote's button, the receiver's blue LED will flash then come off, Setting successfully.2. Setting Toggle Mode (Common working mode): Press the receiver's Learning button 2 time, the receiver's red LED will be lighindividuals up, it comes into Setting state; Press the remote's button, the receiver's blue LED will flash then come off, Setting successfully.Momentary mode: Press the Remote control button, the receiver's relay is ON; release button, the receiver's relay is OFF. Toggle mode: Press Remote control button for 1 time, the receiver's relay is ON; press button again, the receiver's relay is OFF. Latched mode: Press Remote control button A, the receiver's relay is ON, Press the transmitter's button B, the receiver's relay is OFF.Reset function: After push the receiver's learning button 8 times, the receiver Clear all the remote control data in iindividuals memory.When the red LED flashes for a few times, it indicates that the clear function is completed. (After cleared the code in the receiver, all the remote control cannot work with the receiver.)Set power on state： Press the learning button on the receiver 6 times, and the red LED flashes 3 times.For Switch the power on / off state successfully.How to access WiFi?(Wifi+RF433 version)After the wiring is completed, turn on the power and operate according to the status of the smart For Switch indicator: 1) If the LED light of the smart For Switch flashes continuously at this time, it indicates that the smart For Switch has entered the state of waiting for connection to WiFi; then open the APP and follow the instructions to connect to WiFi.2) If the indicator light of the smart For Switch is not flaLower Legg LED light, please press the button of the smart For Switch and keep it for more than 5 seconds until the LED light flashes continuously, then open the APP and connect to the WiFi according to the manual.