Digital LED Temperature Controller XH-3002, 10A Thermostat Regulator with LCD Display, for Seafood Machines & Industrial Use, AC110V~220V, Easy Installation, White & Gray, Home Thermostat.

This is a Professional Digital LED Temperature Controller XH-3002 with a built-in 10A Thermostat Regulator and LCD Display. It is designed for use with Seafood Machines & Industrial applications, with easy installation and compatibility with AC110V~220V power. The controller comes in a White & Gray color scheme and can also be used as a Thermostat for Home settings.

Temperature measurement, LCD display. It has the function of refrigeration, heating control. Temperature setting upper and lower limits. Simple operation, suitable for seafood machines. Easy to install and use, very convenient. Long press the UP button the temperature display flashing, press the UP or DOWN button Set the beginning of the temperature v. Press Down the display button to stop temperature.Long press the Down button the temperature display flashing, press the UP or Down button Set to stop the temperature v. Specification: Supply voltage: 110-220V. Temperature range: -50-120 degrees. Range of temperature control: -50-120 degrees. Temperature control accuracy: + 0.1 degrees. Temperature measurement accuracy: + 0.2 degrees. Load power: 1500W. Measuring input: NTC10K probe L=1 M. Output type: direct output. Output capacity: maximum 10A.Mounting hole distance: 73mm (hole distance 4mm). Size: 60 * 45 * 31mm. Color: white & gray. Note: There might be a bit color distortions due to different computer resolutions. There might be size errors due to different computer resolutions.P0 Set startup temperature: Press the setting button once to enter the internal menu, which defaults to P0. Press the setting button again, and set the desired starting temperature through the up and down buttons. P1 Set stop temperature: Press the setting button once to enter the internal menu. The digital display is P0, and For Switch to P1 through the up and down buttons. Press the setting button again to set the desired stop temperature through the up and down buttons.P2 Set temperature correction:Enter the internal menu, For Switch to P2 using the up and down buttons, press the setting button again, and set the required calibration temperature using the up and down buttons. In the setting, if the detected temperature v is 0.5 ° C greater than the actual temperature v, the calibration temperature that needs to be set is -0.5 ° C. If the detected temperature v is 1 ℃ lower than the actual temperature v, the calibration temperature that needs to be set is 1 ℃.Detected temperature ± corrected temperature=actual temperature. P3 Set Delay Start: Enter the internal menu, For Switch to P3 using the up and down buttons, press the set button again, and set the desired delay time (in minutes) using the up and down buttons.Delayed start is generally used for compressor refrigeration. If it is used for refrigerators and freezers, this v needs to be set to 3-6 minutes based on the compressor return pressure. (If you are not using the compressor control or do not need the delay function, skip this option directly) Heating mode: Start temperaturestop temperature (the program automatically determines that the working mode is refrigeration mode) Setting method: Press the setting button to enter the internal menu, set the start temperature through the P0 v, and stop temperature through the P1 v Use Case: Control cabinet heat sink, stop cooling at 26 ℃, and restart the heat sink when the temperature rises to 30 ℃. How to set it?1. Confirm that the working mode is refrigeration mode, and start temperature>stop temperature. Use Case: Control cabinet heat sink, stop cooling at 26 ℃, and restart the heat sink when the temperature rises to 30 ℃. How to set it? 1. Confirm that the working mode is refrigeration mode, and start temperature>stop temperature. 2. Press the setting button to enter the internal menu, select P0 to start the temperature, and set the P0 v to 30 ℃.3. Press the setting button to enter the internal menu, select P1 to stop the temperature setting, and set the P1 v to 26 ℃.Example of using scenario settings: How do I set the temperature for hatching chicks to be between 37.5 ℃ and 38 ℃? 1. Short press the setting key to display P0 on the screen, then short press the setting key to display the current starting temperature. Press the up/down keys to adjust the starting temperature to 37.5 ℃ (no operation for 5 seconds, automatically save and exit)2. Short press the setting button to display P0 on the screen, press the up button to For Switch to P1, and then short press the setting button to display the current stop temperature. Press the up/down button to adjust the stop temperature to 38 ℃ 3. After setting, the temperature controller will control the heating equipment at 37.5 ℃ for heating. When the temperature rises to 38 ℃, it will stop, and when the temperature drops to 37.5 ℃, it will start heating again and continue cyclingThe actual measured temperature is 35 ℃, and the temperature controller displays 35.6 ℃. How to calibrate? 1. Short press the setting button to display P0 on the screen, press the up button to For Switch to P2, and then press the setting button to display the current temperature calibration v. Press the up/down button to adjust the calibration to -0.6 ℃ (the temperature displayed by the temperature controller is 0.6 ℃ higher than the actual measured temperature)