DIY Ultrasonic Type-C Atomizer Module for 1.5-2W, 5V, 300mA Single Nozzle Humidifier with Plastic Material - No Switch Needed

This DIY Ultrasonic Atomizer Module is a Type-C 5V 300mA device designed for driving a single nozzle humidifier. The circuit board has a power output of 1.5-2W and is made of plastic material. This electronic accessory does not require a switch for operation.

This circuit board is designed for a DIY humidifier module with a single nozzle atomization feature. It operates at 5V with a current of 300mA, producing 1.5-2W of power. The board is made of 1.2mm FR-4 material and has a resonant frequency of 108-110KHz. Its dimensions are 29.5 × 18.6 × 7mm and it weighs 3.3g.The atomizing plate must be connected for the module to be turned on.A gentle and quiet mist for hydration Generous mist output, dense mist particles, delicate mist, strong spray The atomizer needs to operate at the same frequency as the circuit board to achieve the perfect spray volume.The external power source does not need a USB to TYPE-C power cable for power supply, but needs a direct power supply from the external power cable. The positive and negative pads can be soldered, corresponding to the solder pads and wires with positive and negative polarity symbols.Please follow these guidelines: Do not tamper with the circuit board without permission. Avoid exceeding the input power supply limit. Keep circuit boards away from water or moisture. Use with the corresponding frequency fog film.